From Pig to Fuel - Anaerobic digester generates energy, reduces odors

 Teng Lim is operating a small-scale anaerobic digester at the MU swine farm in Columbia. The system generates energy and can mitigate hog odor. Courtesy Jon Lamb.

The University of Missouri has unveiled a prototype small-scale anaerobic digestion system that produces biogas from pig manure. The biogas can be used to heat a farm and create electricity. The device also reduces odor from swine operations.

“What we want to do is improve and fully utilize all the biogas for energy production,” said Teng Lim, Extension Ag Systems Management associate professor.

Funded by the MU College of Agriculture, Food and Natural Resources, the anaerobic digester consists of three tanks. Manure from the hog barn pit is pumped into one tank where the manure is stored and mixed. The anaerobic digestion takes place in the other two tanks, where bacteria break down the manure in these warm and oxygen-free tanks.

The biogas from the manure can be used for electricity and hot water production. With some further treatment it can also be stored as a compressed natural gas, for heating or even vehicle fuel.

PigsLim says a larger scale digester could supply a farm’s energy needs and also be sold to the grid to provide electricity to the community.

There are other benefits to anaerobic digestion in addition to energy generation. The digested manure retains the nutrients to be good fertilizer while becoming a more consistent product. Also, the digester can reduce odor emissions.

“When the manure is treated by the digester process the odor concentration is significantly reduced,” Lim said. “There is still going to be odor, but it’s going to be much lower and less fluctuation than the raw manure.”

A Lot of Pork

The swine industry is big in the United States – there are 73,150 pork farms in America with 120 million pigs marketed each year.

Before the 1960s, most pork in the U.S. was raised in outside lots or on pasture systems. With the development of slotted floors and liquid manure handling equipment, it became possible for producers to more easily care for larger numbers of animals. Enclosed buildings overcame most weather problems and predators, and minimized the potential pollution from outside lot runoff.

Typically, pig odor is a localized air quality problem, with low concentrations of odorous gases such as p-cresol. Odor problems are often a starting point for litigation. Many farmers can go out of business just fighting a lawsuit.

An Important Part of Future Farms?

There are challenges to anaerobic digestion, the biggest being cost and management. In a commercial setting the digester would be 100 times larger than the one at MU’s swine research facility.

Lim pointed out that industry leaders and scientists believe anaerobic digesters will be an important piece of future farms, both to mitigate odor and for generating renewable energy.  The cost is a major obstacle now. The team is working closely with industry experts from Martin Machinery, a Missouri company who specializes in biogas generators and control systems.

MU researchers are using the scaled down digester to find ways to make digesters more affordable and easier to manage. They are also using it as an education tool to show producers the potentials, what it takes to process the manure, and to train people how to properly run a system like this.

Source: Cafnr

Quantum computer as detector shows space is not squeezed

As the Earth rotates every 24 hours, the orientation of the ions in the quantum computer/detector changes with respect to the Sun’s rest frame. If space were squeezed in one direction and not another, the energies of the electrons in the ions would have shifted with a 12-hour period. (Hartmut Haeffner image)

A new experiment by UC Berkeley physicists used partially entangled atoms — identical to the qubits in a quantum computer — to demonstrate more precisely than ever before that this is true, to one part in a billion billion.

The classic experiment that inspired Albert Einstein was performed in Cleveland by Albert Michelson and Edward Morley in 1887 and disproved the existence of an “ether” permeating space through which light was thought to move like a wave through water. What it also proved, said Hartmut Häffner, a UC Berkeley assistant professor of physics, is that space is isotropic and that light travels at the same speed up, down and sideways.

“Michelson and Morley proved that space is not squeezed,” Häffner said. “This isotropy is fundamental to all physics, including the Standard Model of physics. If you take away isotropy, the whole Standard Model will collapse. That is why people are interested in testing this.”

The Standard Model of particle physics describes how all fundamental particles interact, and requires that all particles and fields be invariant under Lorentz transformations, and in particular that they behave the same no matter what direction they move.

Häffner and his team conducted an experiment analogous to the Michelson-Morley experiment, but with electrons instead of photons of light. In a vacuum chamber he and his colleagues isolated two calcium ions, partially entangled them as in a quantum computer, and then monitored the electron energies in the ions as Earth rotated over 24 hours.

If space were squeezed in one or more directions, the energy of the electrons would change with a 12-hour period. It didn’t, showing that space is in fact isotropic to one part in a billion billion (1018), 100 times better than previous experiments involving electrons, and five times better than experiments like Michelson and Morley’s that used light.

The results disprove at least one theory that extends the Standard Model by assuming some anisotropy of space, he said.

Häffner and his colleagues, including former graduate student Thaned Pruttivarasin, now at the Quantum Metrology Laboratory in Saitama, Japan, will report their findings in the Jan. 29 issue of the journal Nature.

Entangled qubits

Häffner came up with the idea of using entangled ions to test the isotropy of space while building quantum computers, which involve using ionized atoms as quantum bits, or qubits, entangling their electron wave functions, and forcing them to evolve to do calculations not possible with today’s digital computers. It occurred to him that two entangled qubits could serve as sensitive detectors of slight disturbances in space.

“I wanted to do the experiment because I thought it was elegant and that it would be a cool thing to apply our quantum computers to a completely different field of physics,” he said. “But I didn’t think we would be competitive with experiments being performed by people working in this field. That was completely out of the blue.”

He hopes to make more sensitive quantum computer detectors using other ions, such as ytterbium, to gain another 10,000-fold increase in the precision measurement of Lorentz symmetry. He is also exploring with colleagues future experiments to detect the spatial distortions caused by the effects of dark matter particles, which are a complete mystery despite comprising 27 percent of the mass of the universe.

“For the first time we have used tools from quantum information to perform a test of fundamental symmetries, that is, we engineered a quantum state which is immune to the prevalent noise but sensitive to the Lorentz-violating effects,” Häffner said. “We were surprised the experiment just worked, and now we have a fantastic new method at hand which can be used to make very precise measurements of perturbations of space.”

Other co-authors are UC Berkeley graduate student Michael Ramm, former UC Berkeley postdoc Michael Hohensee of Lawrence Livermore National Laboratory, and colleagues from the University of Delaware and Maryland and institutions in Russia. The work was supported by the National Science Foundation.

Source: UC Berkeley

Graphene Is Strongest Material in the World Even with Defects

Graphene remains the strongest material ever measured and, as Professor Hone once put it, so strong that "it would take an elephant, balanced on a pencil, to break through a sheet of graphene the thickness of Saran Wrap.” —Illustration by Andrew Shea for Columbia Engineering

In a new study, published in Science May 31, 2013, Columbia Engineering researchers demonstrate that graphene, even if stitched together from many small crystalline grains, is almost as strong as graphene in its perfect crystalline form. This work resolves a contradiction between theoretical simulations, which predicted that grain boundaries can be strong, and earlier experiments, which indicated that they were much weaker than the perfect lattice.

Graphene consists of a single atomic layer of carbon, arranged in a honeycomb lattice. “Our first Science paper, in 2008, studied the strength graphene can achieve if it has no defects—its intrinsic strength,” says James Hone, professor of mechanical engineering, who led the study with Jeffrey Kysar, professor of mechanical engineering. “But defect-free, pristine graphene exists only in very small areas. Large-area sheets required for applications must contain many small grains connected at grain boundaries, and it was unclear how strong those grain boundaries were. This, our second Science paper, reports on the strength of large-area graphene films grown using chemical vapor deposition (CVD), and we’re excited to say that graphene is back and stronger than ever.”

The study verifies that commonly used methods for post-processing CVD-grown graphene weaken grain boundaries, resulting in the extremely low strength seen in previous studies. The Columbia Engineering team developed a new process that prevents any damage of graphene during transfer. “We substituted a different etchant and were able to create test samples without harming the graphene,” notes the paper’s lead author, Gwan-Hyoung Lee, a postdoctoral fellow in the Hone lab. “Our findings clearly correct the mistaken consensus that grain boundaries of graphene are weak. This is great news because graphene offers such a plethora of opportunities both for fundamental scientific research and industrial applications.”

                                              Profs. James Hone and Jeffrey Kysar
In its perfect crystalline form, graphene (a one-atom-thick carbon layer) is the strongest material ever measured, as the Columbia Engineering team reported in Science in 2008—so strong that, as Hone observed, “it would take an elephant, balanced on a pencil, to break through a sheet of graphene the thickness of Saran Wrap.” For the first study, the team obtained small, structurally perfect flakes of graphene by mechanical exfoliation, or mechanical peeling, from a crystal of graphite. But exfoliation is a time-consuming process that will never be practical for any of the many potential applications of graphene that require industrial mass production.

Currently, scientists can grow sheets of graphene as large as a television screen by using chemical vapor deposition (CVD), in which single layers of graphene are grown on copper substrates in a high-temperature furnace. One of the first applications of graphene may be as a conducting layer in flexible displays.

“But CVD graphene is ‘stitched’ together from many small crystalline grains—like a quilt—at grain boundaries that contain defects in the atomic structure,” Kysar explains. “These grain boundaries can severely limit the strength of large-area graphene if they break much more easily than the perfect crystal lattice, and so there has been intense interest in understanding how strong they can be.”

The Columbia Engineering team wanted to discover what was making CVD graphene so weak. In studying the processing techniques used to create their samples for testing, they found that the chemical most commonly used to remove the copper substrate also causes damage to the graphene, severely degrading its strength.

WATCH VIDEO
Click on the Video to watch Prof. James Hone take us on a tour of his synthesis lab in the Northwest Corner Building, where he grows graphene and nanotubes.

Their experiments demonstrated that CVD graphene with large grains is exactly as strong as exfoliated graphene, showing that its crystal lattice is just as perfect. And, more surprisingly, their experiments also showed that CVD graphene with small grains, even when tested right at a grain boundary, is about 90% as strong as the ideal crystal.

“This is an exciting result for the future of graphene, because it provides experimental evidence that the exceptional strength it possesses at the atomic scale can persist all the way up to samples inches or more in size,” says Hone. “This strength will be invaluable as scientists continue to develop new flexible electronics and ultrastrong composite materials.”

Strong, large-area graphene can be used for a wide variety of applications such as flexible electronics and strengthening components—potentially, a television screen that rolls up like a poster or ultrastrong composites that could replace carbon fiber. Or, the researchers speculate, a science fiction idea of a space elevator that could connect an orbiting satellite to Earth by a long cord that might consist of sheets of CVD graphene, since graphene (and its cousin material, carbon nanotubes) is the only material with the high strength-to-weight ratio required for this kind of hypothetical application.

The team is also excited about studying 2D materials like graphene. “Very little is known about the effects of grain boundaries in 2D materials,” Kysar adds. “Our work shows that grain boundaries in 2D materials can be much more sensitive to processing than in 3D materials. This is due to all the atoms in graphene being surface atoms, so surface damage that would normally not degrade the strength of 3D materials can completely destroy the strength of 2D materials. However with appropriate processing that avoids surface damage, grain boundaries in 2D materials, especially graphene, can be nearly as strong as the perfect, defect-free structure.”

The study was supported by grants from the Air Force Office of Scientific Research and the National Science Foundation.

—by Holly Evarts

Source: Columbia University

Grad Student Solves 30-Year-Old Physics Problem

                    Emilie Huffman, second year PhD student in physics. Credit: Duke University

Sometimes an age-old question just needs a fresh set of eyes.

That was the case in Duke’s physics department, where a graduate student and professor recently resolved a calculating dilemma that has vexed computational physicists for decades.

Emilie Huffman is a second-year PhD student from Charlotte, North Carolina. Last spring she began working with Shailesh Chandrasekharan, an associate professor and the director of graduate studies in physics, on what’s known as a sign problem.

Chandrasekharan is a theoretical nuclear and particle physicist who specializes in solving sign problems, which arise when one uses certain computational algorithms to calculate the behavior of large numbers of particles called fermions.

“Almost all the matter we know of are made with fermions,” Chandrasekharan said. “As building blocks of matter, it’s very important to be able to do calculations with them.”

But calculations of such complexity get tricky, and sign problems make it easy for wrong results to surface.

“It’s a very broad problem that affects almost all fields of physics involving quantum mechanics with strong correlations, where Monte Carlo methods are essential to perform calculations,” Chandrasekharan said.

Some in the field have simply moved on since the 1980s, leaving interesting questions plagued by sign problems unexplored. Other scientists have found workarounds and approximations. Very few, including Chandrasekharan, have tried to figure out solutions through the years. Huffman began work to expand on one of her advisor’s solutions, involving a grouping concept called fermion bags, and apply them to a new class of problems.

“She finally figured out a nice formula,” Chandrasekharan said. “Although the formula is quite simple and elegant, I couldn’t guess it.”

“In physics, often there’s a truth, and if you’re hitting on the right truth, everything starts falling into place.” Chandrasekharan says that’s what happened when he began applying Huffman’s formula to a class of problems.

Their paper appeared recently in the journal Physical Review B’s Rapid Communications.

“Now that I have a solution, I can begin to apply it,” Huffman said. Starting with condensed matter physics, Huffman plans to apply her solution to various questions that have been stymied by sign problems. “I can use this solution to study properties of graphene,” she said, referring to the single-layer carbon that has been touted as the strongest material in the world. Many puzzles remain in the field, especially involving multi-layer graphene sheets.

Wherever she turns her attention next, it’s clear Huffman has a promising career ahead.

Citation: “Solution to sign problems in half-filled spin-polarized electronic systems,” Emilie Huffman and Shailesh Chandrasekharan. Physical Review B Rapid Communications, March 12, 2014. DOI: 10.1103/PhysRevB.89.111101.

Source: Duke University

Silicon carbide increases energy efficiency

Illustration of the fill port of a silicon single crystal bar which has been prepared by the zone melting process. (Photo: TRUMPF Hüttinger)
To increase the efficiency of the power supply in industrial processes, thereby saving energy and CO2, the aim of the new joint "MMPSiC": Researchers at the Light Technology Institute (LTI) at the Karlsruhe Institute of Technology (KIT) examine together with the industrial partners TRUMPF Hüttinger and IXYS Semiconductor the use of power semiconductor switches of silicon carbide. The Federal Research Ministry is supporting the project with around 800,000 euros.

Of the semiconductor manufacturing over the coating of displays to processes in the automotive industry: Many industrial processes consume large amounts of electrical energy. Among these are technologies that will play an important role in the energy transition, as the zone melting method (float zone method) for producing high purity crystalline materials: The substance is electrically fused in a narrow zone; the melting zone is gradually continued. Behind the melting zone crystallized substance purer than before. The zone melting method provides, among other high-purity silicon single crystals for the manufacture of solar cells.

Power supply of zone melting systems based on tube technology systems are used to now having an electrical efficiency of up to 65 percent. By switching to power semiconductor silicon carbide, the efficiency of the process power supply could be increased to over 80 percent. This would save large amounts of electrical energy and reduce greenhouse gas emissions. For example, for a single float-zone scale plant would result consisting of 20 x 150 kW-process power supplies, with an annual duration of 4800 hours, a savings of more than 200,000 kWh of electrical energy and 109 tonnes of CO2 (Umweltbundesamt, as of July 2013).

The feasibility of such a process power supplies, researchers at the Light Technology Institute (LTI) of KIT together with the partners TRUMPF Hüttinger GmbH + Co. KG (Freiburg) and IXYS Semiconductor GmbH (Lampertheim) in the joint project "Modular medium frequency process power supply with silicon carbide semiconductor power switches" (MMPSiC) , As the semiconductor material Silicon Carbide offers several advantages: Thanks to the larger electronic band gap allows much higher operating temperatures than conventional semiconductors. Power electronics with silicon carbide is characterized by higher energy efficiency and compactness.

"When the power of energy-intensive industrial applications such as the zone melting method, it is necessary to switch at high frequencies," says the project director, Dr. Rainer Kling from LTI of KIT. "Silicon carbide is not yet tested for these high frequencies; so that we are breaking new ground. "In addition to examining the long-term stability include the control and the layout of the circuit to the tasks of the KIT researchers in the joint project MMPSiC.

The Federal Ministry of Education and Research (BMBF) supports MMPSiC project on the basis of the program "Information and Communication Technology 2020" (ICT 2020) as part of the funding program "Power electronics to increase energy efficiency" (LES 2) with around 800,000 euros. Of which receives the LTI KIT around 439,000 euros. Overall, the project volume is 1.3 million euros. The joint project started in 2014 and is planned for three years.

Source: KIT

Satellites for peat sake - Peatlands play vital role in curbing climate change

                         Peatlands play vital role in curbing climate change Credit: JHU
Peatlands make up just 3% of land but capture twice as much carbon as all forests combined.

They are also an important source of drinking water and provide a home to many rare and threatened animals and plants.

Ecosystems work best when left intact but these wetland areas are being threatened by human exploitation, resulting in vast carbon emissions, frequent and uncontrollable fires and loss of valuable landscapes.

                                            Handheld devices for collecting ground data

Rezatec in Oxfordshire, UK, supported by ESA’s Integrated Applications Promotions programme, in the Peat spotter project will give landowners an easier and cheaper way of calculating the potential economic value of conserving or restoring their peatlands and monitoring the results of their investment.

“Peat spotter helps landowners to manage their peat resource more sustainably through mapping the area, measuring the carbon it contains and monitoring how its integrity is changing over time,” says Patrick Newton, CEO of Rezatec.

To do this, satellite imagery is used to locate and create initial mappings of peatlands. This information is enriched with ground data collected by field agents using handheld devices.

An app prompts users in the field for measurements, satnav adds location information, and the data are then sent directly to a centralised office via satcom for analysis.

The new approach is a cost-effective way of measuring peat extent and how intact it is over wide and potentially remote areas that are otherwise expensive to measure or inaccessible from the ground.

Rezatec expects water companies, conservation groups and those using typically state-owned land for uses such as plantations to sign up for this service.

Peatlands are an important source of drinking water. Water companies using these resources can significantly reduce the water treatment necessary to meet drinking water standards if they are able to identify areas of degraded peatland and make restoration efforts at source.

Water derived from degraded peatlands can contain raised levels of dissolved organic carbon causing significant discolouration.

On land that is typically used for plantations, peat assets are included in the measurement of the greenhouse gas balance, but only through a rough calculation.

                                                     Deforestation damages peatlands

Making it cheaper and easier to locate and monitor peatlands will make it simpler to calculate the economic value of conserving and restoring these areas and, in turn, this can be positive for society, the economy and the environment.

Within the mobile device apps Rezatec includes: guides to help identify flora and fauna, videocam monitoring of borders, photo uploading, alerts when levels are breached, and fire mapping.

“This innovative use of satellite data has far-reaching benefits for the space industry and the wider UK economy,” notes Alan Brunstrom, head of the Service Business Office in ESA’s Integrated Applications Promotion programme.

“Perhaps more importantly, it demonstrates how the scientific analysis of ‘big data’ can benefit the environment and, in this particular scenario, provide valuable information to allow sustainable peatland management practices on a global scale.”

Source: JHU

Switching to vehicles powered by electricity from renewables could save lives - Video

Use of corn ethanol or electricity from coal worse than gasoline for public health

Driving vehicles that use electricity from renewable energy instead of gasoline could reduce the resulting deaths due to air pollution by 70 percent. This finding comes from a new life cycle analysis of conventional and alternative vehicles and their air pollution-related public health impacts, published Monday, Dec. 15, 2014, in the Proceedings of the National Academy of Sciences.

The study also shows that switching to vehicles powered by electricity made using natural gas yields large health benefits. Conversely, vehicles running on corn ethanol or vehicles powered by coal-based or "grid average" electricity are worse for health; switching from gasoline to those fuels would increase the number of resulting deaths due to air pollution by 80 percent or more.

“These findings demonstrate the importance of clean electricity, such as from natural gas or renewables, in substantially reducing the negative health impacts of transportation,” said Chris Tessum, co-author on the study and a researcher in the Department of Civil, Environmental, and Geo- Engineering in the University of Minnesota’s College of Science and Engineering.

The University of Minnesota team estimated how concentrations of two important pollutants—particulate matter and ground-level ozone—change as a result of using various options for powering vehicles. Air pollution is the largest environmental health hazard in the U.S., in total killing more than 100,000 people per year. Air pollution increases rates of heart attack, stroke, and respiratory disease.

The authors looked at liquid biofuels, diesel, compressed natural gas, and electricity from a range of conventional and renewable sources. Their analysis included not only the pollution from vehicles, but also emissions generated during production of the fuels or electricity that power them. With ethanol, for example, air pollution is released from tractors on farms, from soils after fertilizers are applied, and to supply the energy for fermenting and distilling corn into ethanol.

“Our work highlights the importance of looking at the full life cycle of energy production and use, not just at what comes out of tailpipes,” said Bioproducts and Biosystems Engineering Assistant Professor Jason Hill, co-author of the study. “We greatly underestimate transportation’s impacts on air quality if we ignore the upstream emissions from producing fuels or electricity.”

The researchers also point out that whereas recent studies on life cycle environmental impacts of transportation have focused mainly on greenhouse gas emissions, it is also important to consider air pollution and health. Their study provides a unique look at where life cycle emissions occur, how they move in the environment, and where people breathe that pollution. Their results provide unprecedented detail on the air quality-related health impacts of transportation fuel production and use.

“Air pollution has enormous health impacts, including increasing death rates across the U.S.,” said Civil, Environmental and Geo- Engineering Associate Professor Julian Marshall, co-author on this study. “This study provides valuable new information on how some transportation options would improve or worsen those health impacts.”

The study’s authors are Marshall and Tessum (College of Science and Engineering) and Hill (College of Food, Agricultural and Natural Resource Sciences), at the University of Minnesota. Marshall and Hill are also Resident Fellows of the University’s Institute on the Environment. This research was supported by the University of Minnesota’s Initiative for Renewable Energy and the Environment (IREE), the Office of Energy Efficiency & Renewable Energy of the U.S. Dept. of Energy (EERE/DOE), and the Agricultural and Food Research Initiative of the U.S. Dept. of Agriculture (USDA/AFRI).

WATCH VIDEO


Source: University of Minnesota

Handheld scanner could make brain tumor removal more complete, reducing recurrence

A handheld device that resembles a laser pointer could someday help surgeons remove all of the cells in a brain tumor. Credit: Moritz Kircher

Cancerous brain tumors are notorious for growing back despite surgical attempts to remove them -- and for leading to a dire prognosis for patients. But scientists are developing a new way to try to root out malignant cells during surgery so fewer or none get left behind to form new tumors. The method, reported in the journal ACS Nano, could someday vastly improve the outlook for patients.

Moritz F. Kircher and colleagues at Memorial Sloan Kettering Cancer Center point out that malignant brain tumors, particularly the kind known as glioblastoma multiforme (GBM), are among the toughest to beat. Although relatively rare, GBM is highly aggressive, and its cells multiply rapidly. Surgical removal is one of the main weapons doctors have to treat brain tumors. The problem is that currently, there's no way to know if they have taken out all of the cancerous cells. And removing extra material "just in case" isn't a good option in the brain, which controls so many critical processes. The techniques surgeons have at their disposal today are not accurate enough to identify all the cells that need to be excised. So Kircher's team decided to develop a new method to fill that gap.

The researchers used a handheld device resembling a laser pointer that can detect "Raman nanoprobes" with very high accuracy. These nanoprobes are injected the day prior to the operation and go specifically to tumor cells, and not to normal brain cells. Using a handheld Raman scanner in a mouse model that mimics human GBM, the researchers successfully identified and removed all malignant cells in the rodents' brains. Also, because the technique involves steps that have already made it to human testing for other purposes, the researchers conclude that it has the potential to move readily into clinical trials. Surgeons might be able to use the device in the future to treat other types of brain cancer, they say.

The authors acknowledge funding from the National Institutes of Health.

Source: American Chemical Society

'Grimsel' electric racing car breaks world record

The record journey from the car driver's perspective. Credit: AMZ Racing

The 'grimsel' electric racing car today broke the previous world record for acceleration in electric cars. The vehicle accelerated from 0 to 100 km/h in 1.79 seconds in under 30 metres. The new record was set by students from ETH Zurich and Lucerne University of Applied Sciences and Arts, who also designed and built the vehicle.

The Formula Student team at the Academic Motorsports Club Zurich (AMZ) finally did it: its 'grimsel' electric racing car smashed the previous world record when it accelerated from 0 to 100 km/h in just 1.785 seconds. The previous record of 2.134 seconds was held by an electric car built by Delft University of Technology. The new record was set at the military airfield in Dübendorf, where the vehicle reached a speed of 100 km per hour in less than 30 metres.

The new record-breaking vehicle is a Formula Student electric car that was developed and built in less than a year by 30 students at ETH Zurich and Lucerne University of Applied Sciences and Arts. The 'grimsel' is the fifth AMZ electric car and the result of continuous development. The carbon fibre construction has a total weight of 168 kg and produces about 200 hp. A four-wheel drive is implemented with four specially designed wheel hub motors, which generate a total torque of 1630 Nm at the wheels. By means of traction control, torque distribution is controlled individually for each wheel to maximise vehicle acceleration. No other production vehicle in the world has reached a similarly strong acceleration.

AMZ's most successful car

The 'grimsel' celebrated numerous successes at the Formula Student international competition this summer. With more than 500 teams, Formula Student is the world's biggest competition for engineers and is held annually at various locations around the globe. With three overall wins and an average of 920 points out of a possible 1,000, the 'grimsel' is AMZ's most successful car. And with its victories in Austria and Spain, it achieved the two highest scores in the European history of Formula Student. These further strengthened AMZ's standing at the top of the Formula Student world rankings and demonstrated the potential in electric drive concepts.

Source: ETH Zürich

A new, tunable device for spintronics

Tunable spin Hall angle device based on GaAs through field induced intervalley repopulation.
Credit: Copyright Jairo Sinova

An international team of scientists including physicist Jairo Sinova from the University of Mainz has developed a tunable spin-charge converter made of GaAs.

Spin-charge converters are important devices in spintronics, an electronic which is not only based on the charge of electrons but also on their spin and the spin-related magnetism. Spin-charge converters enable the transformation of electric into magnetic signals and vice versa. Recently, the research group of Professor Jairo Sinova from the Institute of Physics at Johannes Gutenberg University Mainz in collaboration with researchers from the UK, Prague, and Japan, has for the first time realised a new, efficient spin-charge converter based on the common semiconductor material GaAs. Comparable efficiencies had so far only been observed in platinum, a heavy metal. In addition, the physicists demonstrated that the creation or detection efficiency of spin currents is electrically tunable in a certain regime. This is important when it comes to real devices. The underlying mechanism, that was revealed by theoretical works of the Sinova group, opens up a new approach in searching and engineering spintronic materials. These results have recently been published in the journal Nature Materials.

Spintronics does not only make use of the electron's charge to transmit and store information but it takes also advantage of the electron's spin. The spin can be regarded as a rotation of the electron around its own axis, and generates a magnetic field like a small magnet. In some materials, electron spins spontaneously align their direction, leading to the phenomenon of ferromagnetism which is well known e.g. in iron. Additionally, "spin-up" or "spin-down" directions can be used to represent two easily distinguishable states -- 0 and 1 -- used in information technology. This is already used for memory applications such as computer hard discs.

Making use of electron spin for information transmission and storage, enables the development of electronic devices with new functionalities and higher efficiency. To make real use of the electron spin, it has to be manipulated precisely: it has to be aligned, transmitted and detected. The work of Sinova and his colleagues shows, that it is possible to do so using electric fields rather than magnetic ones. Thus, the very efficient, simple and precise mechanisms of charge manipulation well established in semiconductor electronics can be transferred to the world of spintronic and thereby combine semiconductor physics with magnetism.

Spin-charge converters are essential tools for that. They can transform charge currents into spin currents, and vice versa. The main principle behind these converters is the so called spin-Hall effect. Jairo Sinova had already been involved in the prediction and discovery of this relativistic phenomenon in 2004.

The spin-Hall effect appears when an electric field drives electrons through a (semi-) conductor plate. Taking a look at the classical Hall effect that is known from undergraduate physics, the interaction of moving electrons and an external magnetic field forces the electrons to move to one side of the plate, perpendicular to their original direction. This leads to the so called Hall voltage between both sides of the plate. For the spin-Hall effect electron-spins are generated by irradiating the sample with circularly polarised light. The electron spins are then parallel or antiparallel, and their direction is perpendicular to the plate and the direction of movement. The moving electron spins are now forced to one or the other side of the plate, depending on the spin orientation. The driving force behind this is the so called spin-orbit coupling, a relativistic electromagnetic effect which influences moving electron spins. This leads to the separation of both spin orientations.

To make practical use of this effect, it is essential to get a highly efficient spin separation. Up to now, platinum has been the most efficient spin-charge converter material, as it is a heavy metal, and the spin-orbit coupling of heavy metals is known to be especially strong due to the large amount of protons (positive charge) in their core.

Now, Sinova and his colleagues have shown that gallium-arsenide (GaAs), a very common and widely used semiconductor material, can be an as efficient spin-charge converter as platinum, even at room temperature, which is important for practical applications. Moreover, the physicists have demonstrated for the first time that the efficiency can be tuned continuously by varying the electric field that drives the electrons.

The reason for this -- as theoretical calculations of the Sinova group have shown -- lies in the existence of certain valleys in the conduction band of the semiconductor material. One can think of the conduction band and its valleys as of a motor highway with different lanes, each one requiring a certain minimum velocity. Applying a higher electric field enables a transition from one lane to the other.

Since the spin-orbit coupling is different in each lane, a transition also affects the strength of the spin-hall effect. By varying the electric field, the scientists can distribute the electron spins on the different lanes, thus varying the efficiency of their spin-charge converter.

By taking into account the valleys in the conduction band, Sinova and his colleagues open up new ways to find and engineer highly efficient materials for spintronics. Especially, since current semiconductor growth technologies are capable of engineering the energy levels of the valleys and the strength of spin-orbit coupling, e.g. by substituting Ga or As with other materials like Aluminum.

Source: Universität Mainz

Electric eels deliver taser-like shocks

News research has discovered that the electric eel delivers Taser-like shocks. Credit: Kenneth Catania, Vanderbilt University

The electric eel -- the scaleless Amazonian fish that can deliver an electrical jolt strong enough to knock down a full-grown horse -- possesses an electroshock system uncannily similar to a Taser.

That is the conclusion of a nine-month study of the way in which the electric eel uses high-voltage electrical discharges to locate and incapacitate its prey. The research was conducted by Vanderbilt University Stevenson Professor of Biological Sciences Kenneth Catania and is described in the article "The shocking predatory strike of the electric eel" published in the Dec. 5 issue of the journal Science.

People have known about electric fish for a long time. The ancient Egyptians used an electric marine ray to treat epilepsy. Michael Faraday used eels to investigate the nature of electricity and eel anatomy helped inspire Volta to create the first battery. Biologists have determined that a six-foot electric eel can generate about 600 volts of electricity -- five times that of a U.S. electrical outlet. This summer scientists at the University of Wisconsin-Madison announced that they had sequenced the complete electric eel genome.

Until now, however, no one had figured out how the eel's electroshock system actually worked. In order to do so, Catania equipped a large aquarium with a system that can detect the eel's electric signals and obtained several eels, ranging up to four feet in length.

As he began observing the eels' behavior, the biologist discovered that their movements are incredibly fast. They can strike and swallow a worm or small fish in about a tenth of a second. So Catania rigged up a high-speed video system that ran at a thousand frames per second so he could study the eel's actions in slow motion.

Catania recorded three different kinds of electrical discharges from the eels: low-voltage pulses for sensing their environment; short sequences of two or three high-voltage millisecond pulses (called doublets or triplets) given off while hunting; and volleys of high-voltage, high-frequency pulses when capturing prey or defending themselves from attack.

He found that the eel begins its attack on free-swimming prey with a high-frequency volley of high-voltage pulses about 10 to 15 milliseconds before it strikes. In the high-speed video, it became apparent that the fish were completely immobilized within three to four milliseconds after the volley hit them. The paralysis was temporary: If the eel didn't immediately capture a fish, it normally regained its mobility after a short period and swam away.

"It's amazing. The eel can totally inactivate its prey in just three milliseconds. The fish are completely paralyzed," said Catania.

These observations raised an obvious question: How do the eels do it? For that, there was no clear answer in the scientific literature.

"I have some friends in law enforcement, so I was familiar with how a Taser works," said Catania. "And I was struck by the similarity between the eel's volley and a Taser discharge. A Taser delivers 19 high-voltage pulses per second while the electric eel produces 400 pulses per second."

The Taser works by overwhelming the nerves that control the muscles in the target's body, causing the muscles to involuntarily contract. To determine if the eel's electrical discharge had the same effect, Catania walled off part of the aquarium with an electrically permeable barrier. He placed a pithed fish on other side of the barrier from the eel and then fed the eel some earthworms, which triggered its electrical volleys. The volleys that passed through the barrier and struck the fish produced strong muscle contractions.

To determine whether the discharges were acting on the prey's motor neurons -- the nerves that control the muscles -- or on the muscles themselves, he placed two pithed fish behind the barrier: one injected with saline solution and other injected with curare, a paralytic agent that targets the nervous system. The muscles of the fish with the saline continued to contract in response to the eel's electrical discharges but the muscle contractions in the fish given the curare disappeared as the drug took effect. This demonstrated that the eel's electrical discharges were acting through the motor neurons just like Taser discharges.

Next Catania turned his attention to the way in which the eel uses electrical signals for hunting. The eel is nocturnal and doesn't have very good eyesight. So it needs other ways to detect hidden prey.

The biologist determined that the closely space doublets and triplets that the eel emits correspond to the electric signal that motor neurons send to muscles to produce an extremely rapid contraction.

"Normally, you or I or any other animal can't cause all of the muscles in our body to contract at the same time. However, that is just what the eel can cause with this signal," Catania said.
Putting together the fact that the eels are extremely sensitive to water movements with the fact that the whole-body muscle contraction causes the prey's body to twitch, creating water movements that the eel can sense, Catania concluded that the eel is using these signals to locate hidden prey.

To test this hypothesis, Catania connected a pithed fish to a stimulator.. He put the fish in a clear plastic bag to protect it from the eel's emissions. He found that when he stimulated the fish to twitch right after the eel emitted one of its signals, the eel would attack. But, when the fish failed to respond to its signal, the eel did not attack. The result supports the idea that the eel uses its electroshock system to force its prey to reveal their location.

"If you take a step back and think about it, what the eel can do is extremely remarkable," said Catania. "It can use its electrical system to take remote control of its prey's body. If a fish is hiding nearby, the eel can force it to twitch, giving away its location, and if the eel is ready to capture a fish, it can paralyze it so it can't escape."

The research was funded by a Pradel Award from the National Academy of Sciences, a Guggenheim fellowship and National Science Foundation grant 0844743.

WATCH VIDEO

Source: Vanderbilt University

Glimpsing pathway of sunlight to electricity

Andrew H. Marcus and Mark C. Lonergan stand by UO spectroscopy equipment. Credit: Image courtesy of University of Oregon

Four pulses of laser light on nanoparticle photocells in a University of Oregon spectroscopy experiment has opened a window on how captured sunlight can be converted into electricity.

The work, which potentially could inspire devices with improved efficiency in solar energy conversion, was performed on photocells that used lead-sulfide quantum dots as photoactive semiconductor material. The research is detailed in a paper placed online by the journal Nature Communications.

In the process studied, each single photon, or particle of sunlight, that is absorbed potentially creates multiple packets of energy called excitons. These packets can subsequently generate multiple free electrons that generate electricity in a process known as multiple exciton generation (MEG). In most solar cells, each absorbed photon creates just one potential free electron.

Multiple exciton generation is of interests because it can lead to solar cells that generate more electrical current and make them more efficient. The UO work shines new light on the little understood process of MEG in nanomaterials.

While the potential importance of MEG in solar energy conversion is under debate by scientists, the UO spectroscopy experiment -- adapted in a collaboration with scientists at Sweden's Lund University -- should be useful for studying many other processes in photovoltaic nanomaterials, said Andrew H. Marcus, professor of physical chemistry and head of the UO Department of Chemistry and Biochemistry.

Spectroscopic experiments previously designed by Marcus to perform two-dimensional fluorescence spectroscopy of biological molecules were adapted to also measure photocurrent. "Spectroscopy is all about light and molecules and what they do together," Marcus said. "It is a really great probe that helps to tell us about the reaction pathway that connects the beginning of a chemical or physical process to its end.

"The approach is similar to looking at how molecules come together in DNA, but instead we looked at interactions within semiconductor materials," said Marcus, an affiliate in UO's Institute of Molecular Biology, Materials Science Institute and Oregon Center for Optics. "Our method made it possible to look at electronic pathways involved in creating multiple excitons. The existence of this phenomenon had only been inferred through indirect evidence. We believe we have seen the initial steps that lead to MEG-mediated photo conductivity."

The controlled sequencing of laser pulses allowed the seven-member research team to see -- in femtoseconds (a femtosecond is one millionth of one billionth of a second) -- the arrival of light, its interaction with resting electrons and the subsequent conversion into multiple excitons. The combined use of photocurrent and fluorescence two-dimensional spectroscopy, Marcus said, provided complementary information about the reaction pathway.

UO co-author Mark C. Lonergan, professor of physical and materials chemistry, who studies electrical and electrochemical phenomena in solid-state systems, likened the processes being observed to people moving through a corn maze that has one entrance and three exits.
People entering the maze are photons. Those who exit quickly represent absorbed photons that generate unusable heat. People leaving the second exit represent other absorbed photons that generate fluorescence but not usable free electrons. People leaving the final exit signify usable electrical current.

"The question we are interested in is exactly what does the maze look like," Lonergan said. "The problem is we don't have good techniques to look inside the maze to discover the possible pathways through it. The techniques that Andy has developed basically allow us to see into the maze by encoding what is coming out of the system in terms of exactly what is going in. We can visualize what is going on, whether two people coming into the maze shook hands at some point and details about the pathway that led them to come out the electricity exit."

The project began when Tonu Pullerits, who studies ultrafast photochemistry in semiconductor molecular materials at Lund University, approached Marcus about adopting his spectroscopic system to look at solar materials. Khadga J. Karki, a postdoctoral researcher in Pullerits' lab, then visited the UO and teamed with the Marcus and Lonergan groups to reconfigure the equipment.

UO doctoral student Julia R. Widom was a co-leading author on the paper. Other co-authors with Pullerits, Marcus and Lonergan were Joachim Seibt of Lund University and UO graduate student Ian Moody.

Source:  University of Oregon

In world first, researchers convert sunlight to electricity with over 40 percent efficiency

Solar panels

UNSW Australia's solar researchers have converted over 40% of the sunlight hitting a solar system into electricity, the highest efficiency ever reported.

The record efficiency was achieved in outdoor tests in Sydney, before being independently confirmed by the National Renewable Energy Laboratory (NREL) at their outdoor test facility in the United States.

The work was funded by the Australian Renewable Energy Agency (ARENA) and supported by the Australia-US Institute for Advanced Photovoltaics (AUSIAPV).

"This is the highest efficiency ever reported for sunlight conversion into electricity," UNSW Scientia Professor and Director of the Advanced Centre for Advanced Photovoltaics (ACAP) Professor Martin Green said.

"We used commercial solar cells, but in a new way, so these efficiency improvements are readily accessible to the solar industry," added Dr Mark Keevers, the UNSW solar scientist who managed the project.

The 40% efficiency milestone is the latest in a long line of achievements by UNSW solar researchers spanning four decades. These include the first photovoltaic system to convert sunlight to electricity with over 20% efficiency in 1989, with the new result doubling this performance.

"The new results are based on the use of focused sunlight, and are particularly relevant to photovoltaic power towers being developed in Australia," Professor Green said.

Power towers are being developed by Australian company, RayGen Resources, which provided design and technical support for the high efficiency prototype. Another partner in the research was Spectrolab, a US-based company that provided some of the cells used in the project.

A key part of the prototype's design is the use of a custom optical bandpass filter to capture sunlight that is normally wasted by commercial solar cells on towers and convert it to electricity at a higher efficiency than the solar cells themselves ever could.

Such filters reflect particular wavelengths of light while transmitting others.

ARENA CEO Ivor Frischknecht said the achievement is another world first for Australian research and development and further demonstrates the value of investing in Australia's renewable energy ingenuity.

"We hope to see this home grown innovation take the next steps from prototyping to pilot scale demonstrations. Ultimately, more efficient commercial solar plants will make renewable energy cheaper, increasing its competitiveness."

The 40% efficiency achievement is outlined in a paper expected to be published soon by the Progress in Photovoltaics journal. It will also be presented at the Australian PV Institute's Asia-Pacific Solar Research Conference, which begins at UNSW Monday, December 8.

Source: University of New South Wales.

Natural gas saves water, even when factoring in water lost to hydraulic fracturing

For every gallon of water used to produce natural gas through hydraulic fracturing, Texas saved 33 gallons of water by generating electricity with that natural gas instead of coal (in 2011).

A new study finds that in Texas, the U.S. state that annually generates the most electricity, the transition from coal to natural gas for electricity generation is saving water and making the state less vulnerable to drought.

Even though exploration for natural gas through hydraulic fracturing requires significant water consumption in Texas, the new consumption is easily offset by the overall water efficiencies of shifting electricity generation from coal to natural gas. The researchers estimate that water saved by shifting a power plant from coal to natural gas is 25 to 50 times as great as the amount of water used in hydraulic fracturing to extract the natural gas. Natural gas also enhances drought resilience by providing so-called peaking plants to complement increasing wind generation, which doesn't consume water.

The results of The University of Texas at Austin study are published this week in the journal Environmental Research Letters.

The researchers estimate that in 2011 alone, Texas would have consumed an additional 32 billion gallons of water -- enough to supply 870,000 average residents -- if all its natural gas-fired power plants were instead coal-fired plants, even after factoring in the additional consumption of water for hydraulic fracturing to extract the natural gas.

Hydraulic fracturing is a process in which water, sand and chemicals are pumped at high pressure into a well to fracture surrounding rocks and allow oil or gas to more easily flow. Hydraulic fracturing and horizontal drilling are the main drivers behind the current boom in U.S. natural gas production.
Environmentalists and others have raised concerns about the amount of water that is consumed. In Texas, concerns are heightened because the use of hydraulic fracturing is expanding rapidly while water supplies are dwindling as the third year of a devastating drought grinds on. Because most electric power plants rely on water for cooling, the electric power supply might be particularly vulnerable to drought.

"The bottom line is that hydraulic fracturing, by boosting natural gas production and moving the state from water-intensive coal technologies, makes our electric power system more drought resilient," says Bridget Scanlon, senior research scientist at the university's Bureau of Economic Geology, who led the study.

To study the drought resilience of Texas power plants, Scanlon and her colleagues collected water use data for all 423 of the state's power plants from the Energy Information Administration and from state agencies including the Texas Commission on Environmental Quality and the Texas Water Development Board, as well as other data.

Since the 1990s, the primary type of power plant built in Texas has been the natural gas combined cycle (NGCC) plant with cooling towers, which uses fuel and cooling water more efficiently than older steam turbine technologies. About a third of Texas power plants are NGCC. NGCC plants consume about a third as much water as coal steam turbine (CST) plants.

The other major type of natural gas plant in the state is a natural gas combustion turbine (NGCT) plant. NGCT plants can also help reduce the state's water consumption for electricity generation by providing "peaking power" to support expansion of wind energy. Wind turbines don't require water for cooling; yet wind doesn't always blow when you need electricity. NGCT generators can be brought online in a matter of seconds to smooth out swings in electricity demand. By combining NGCT generation with wind generation, total water use can be lowered even further compared with coal-fired power generation.

The study focused exclusively on Texas, but the authors believe the results should be applicable to other regions of the U.S., where water consumption rates for the key technologies evaluated -- hydraulic fracturing, NGCC plants with cooling towers and traditional coal steam turbine plants -- are generally the same.

The Electric Reliability Council of Texas, manager of the state's electricity grid, projects that if current market conditions continue through 2029, 65 percent of new power generation in the state will come from NGCC plants and 35 percent from natural gas combustion turbine plants, which use no water for cooling, but are less energy efficient than NGCC plants.

"Statewide, we're on track to continue reducing our water intensity of electricity generation," says Scanlon.

Hydraulic fracturing accounts for less than 1 percent of the water consumed in Texas. But in some areas where its use is heavily concentrated, it strains local water supplies, as documented in a 2011 study by Jean-Philippe Nicot of the Bureau of Economic Geology. Because natural gas is often used far from where it is originally produced, water savings from shifting to natural gas for electricity generation might not benefit the areas that use more water for hydraulic fracturing.


Source: University of Texas at Austin.